Category: Uncategorized

 

Spiral vs Conventional plaiting

Conventional and Spiral Plaiting

So a question I get asked about a lot, and work that I do a lot of, its known by many names, Spiral Plaiting, Fancy Plaiting, Ring Work and Decorative Plaiting to name but a few, I call it Decorative Plaiting because that’s how it is referred to in all the Australian whip making contests, but I have also been known to call it ring work as this is how the late great Ron Edwards refers to it on occasion in his various books, Anyway these are my thoughts, they are gained from my experience and are not intended at anytime ever to offend any one.

So the most common question I am asked is by budding whip makers is how to do it, and how I do it, there are two methods, the conventional way where the strings are pulled through one at a time left to right, right to left alternatively, under however many over however many, then the other way is by spiralling all of one colour round the job you are plaiting then with the other half you are plaiting in a contrast colour you sew the patterns in….

This naturally leads to another question, which way is best? HaHa! now for one of those answers you dread when you’re new and don’t fully understand the craft, *Both* but don’t worry I won’t leave you hanging, I’ll address both.

The Spiral Method

So as explained above this is achieved by winding half the strings round the job your doing and then feeding the 2nd half of the strings through those first lot to create the patterns. As with both methods there are pro’s and cons, the good things with this method is it is much easier than the alternate string method, you can put it down at any time and come back to it and its also easier to keep things straight, like a lot of things folks have learnt this method from The Rod Edwards books and what he is talking about mostly is stock whip handle plaiting, not so good and not so easy on a shot bag thong that has some give in it, if you plait really high count then once you get over a 24 plait the spiral method is almost essential, the reason being at 24 plait your strings are ofter 2 to 3mm or there abouts at 32 plait or 48 plait or 64 plait then the strings are so thin that no matter how good a quality kangaroo red species hide you think you have you can and probably will break strings, a broken strand in a 12/16/20 plait whip is an easy repair and hard to spot if done correctly, in the higher plait counts near impossible. So on a solid handle like a bullwhip handle, a flogger handle or a stock whip handle, no worries.

On a thong it is in my opinion very different and I have seen lots of evidence its very different for other makers too. I’m not here to name names or put down other whip makers, that’s not what I’m about and the blog itself is about giving quality info for not only budding whip makers but also those that just have an interest. So on a thong that has give it is not quite so easy, usually folks just put in 6 to 12 inches at the start of the thong or just the handle and 6 ish inches after the transition on bullwhips, the reason being it is very time consuming and so to do it all the way down would take forever and need to be charged for. The way this is usually achieved is to tie your strands on down the thong the distance you are going to plait decorative from, you then plait a little herringbone down the thong and tie off then going upwards start your spiral method plaiting, the reason being it is so much easier to pull though 18 inches of string going up than maybe 6/8/10 foot of string depending on how long your whip is going down, that’s just common sense, this is where the problems can arise, often this method can create a patch of plaiting where you transition from that is loose and loose plaiting is very much your enemy it allows grit dirt etc etc to get into the core of your whip and once that has happened its a matter of time, almost like a ticking time bomb…I’ll use Fetlife as an example without naming names, there are many makers on there posting pictures etc and there is a whole plethora of whip users as you’d imagine, one maker in particular seems to be the darling of the crowd, I have only seen 3 bits of this makers work in hand, all bullwhips and all suffer the loose plaiting syndrome which is a crying shame as they are works of art but also nice throwing whips, there are a couple of others who i do know have had work sent back for the same problem so on a thong beware.

The Conventional Method

So again as above this is achieved by drawing strings left to right and right to left under and over, it needs more concentration and i guess for a novice it is harder to keep the patterning straight and you can’t just stop anywhere and come back to it, well I can’t anyway, it is one of those things that the more you do the better you get at it, until such times as you get to the stage where the plait count you’re doing is within your comfort zone then fixing mistakes etc is really not so easy, the big advantage of this method is that as you put the patterns in you are in fact able to keep the plaiting tight with the usual pull tight, plait loose method, no nasty grit and dirt working its way in.

In Conclusion

Well that’s easy up to and including 24 plait I firmly believe that the conventional way of doing it is much much better, and over a 24 plait the only way to do it is the spiral method…that’s how I do it and why I use both methods, I guess that sucks a bit if you’re a newbie you’ll be needing to learn both ways.

So as an aside and it’s my blog so blow my own trumpet time, my prices on my site include the price of decorative plaiting I don’t charge extra for it the prices you see are the prices you’ll pay, thanks for reading I hope someone somewhere got something from reading…Take Care

Tony

UK Whip Crack Convention

IMG_3398

I saw on my Face Book page there had been a UK Whip Crack Convention, shocking really that as a UK Whip Maker I knew nothing of it till after the event…..mmmmmm! Maybe not….

A few years back around 8 I think there was a regular Whip Crack Convention, once a year, it was operated by 2 guy’s who were friends, a Mr.Gamble and a fella known as The Major, they had some sort of fall out and The Major ran it himself for a couple of years. Those were the 2 years I went to it.

Year one we went along and much had been made of the fact it was a family event so there was to be no talk or mention of fetish..fair enough I thought till I got there, it wasn’t the best attended event I’d ever been too, if you take out the photographer and his Lady, another whip maker and his lady who had a stall there, The Major and his lady who were on the till there were 27 paid attendees in all. All but 2 of them were well recognised members of the UK fetish scene, as is the photographer and his lady, the other whip maker and his lady and the Major himself.

22__95041_1378288770_1280_1280

Whatever, I don’t believe people should push things on people be it fetish, politics or religion, I believe once your past 21 and of sound mind you should be old enough and ugly enough to make your own mind up as to if your kinky, vote Lib Dem, Conservative or whoever and if you want to welcome God into your life or not…

297761_10150321233265914_1201663446_n

Anyway the day went well, I had a great time and even won the targeting contest, we left to go home and everyone else went off to a BBQ at The Major’s house, we had only just met him so thought nothing too much of the lack of invite.

Almost immediately after I was contacted by the Major who intimated I might like to put some sponsorship into the following years event, Some good names in whip making had done so previous years, Dave King, Simon Martin, Rhett Kelly, Steve Huntress to name but a few so I said I would. I also joined the Yahoo group that related to the event.

The next year rolled round quickly and having bumped into The Major at a few Fetish Markets we attend felt we had got to know him some what. I made a 6 foot kangaroo hide bullwhip with much fancy ring work in the handle in a 16 plait 2 tone, it went in it’s own bag with a fid, a tub of leather dressing, spare crackers and a spare fall, also a 6 foot nylon 16 plait bullwhip. A more than fair donation I thought at around £500.00 if you’d had to pay for it and more importantly 2 and a half days of my time.

bullwhip (2)

We arranged to meet the Major at the BBB fetish market in Birmingham to drop off the whips, The Major wanted them early so he could photograph them for the web site. More time out of the workshop but hey for a good cause.

The event rolled around and we turned up, paid full price to get in, spent all day teaching then for the 2nd year on the trot didn’t get invited to the BBQ…

“Sometimes you just have to accept your face don’t fit”

I accepted it and I have moved on, my wife is very protective of me and is not in the slightest forgiving, but the moral of the story is sad really, Dave the other up whip maker has retired, as has Alex from Cobra Whips who was an evening and weekend maker any way, leaving me the only UK full time whip maker, and this event the UK’s only non-fetish UK event, such a shame we can’t all work together. Hey-Ho!